Search For Your Exact Product Here
Product Descriptions
Water chiller, also known as chiller, is a cooling water equipment that can provide constant temperature, constant current and constant pressure.
Product Descriptions
One-dimensional High-precision Digital Gauss meters is suitable for most applications that require high testing accuracy and resolution. Measurements range from DC to 100KHZ AC magnetic fields. Automatic zero, automatic range. Hold mode selectable maximum, minimum, peak and valley values. The instrument can simultaneously measure and display 6 parameters. The measurement units can be selected from Gauss, millitesla, A/M, or Oe.
Product Descriptions
Flux-gate magnetometer is a that accurately measures weak static and low-frequency vector magnetic fields,which has the characteristics of high stability, high linearity, high-precision and full digitization. Compared with magnetic field measurement instruments based on Hall effect principle or magnetoresistance effect principle, it is the best choice for measuring weak magnetic fields. It has digital and analog signal output, and a unique CAN bus network interface suitable for multi array magnetic field testing. It is widely used in scientific research, military industry, aerospace and other departments
Product Descriptions
The third-generation smart high precision flux meter is controlled by a microprocessor. It uses electronic integral principle, automatic digital suppression adjustment drift system. Display the measured magnetic flux and magnetic field intensity with a color display.It can measure the total magnetic flux and get the values of magnetic flux density and magnetic field strength. The flux meter is a valuable component in magnetizing machines, manual and automatic magnet detection and classification, and hysteresis loop measurement systems.
Water chiller, also known as chiller, is a cooling water equipment that can provide constant temperature, constant current and constant pressure.
Clamp Electromagnet, of which the shape is like a vice, has two magnetic poles protruding outside the coils. It is usually used to generate an in-plane magnetic field. It is suitable for special operation environments such as microscopy, probe station, the limited space, magneto-optical experiment, and magnetic mineral powder screening. The Clamp Electromagnet is basically custom-made, and can be designed and produced according to user's application conditions and magnetic field requirements.
Programmable DC power supply is a high-performance DC power supply specially developed for scientific research and industrial applications in power automation control.<br/> This series power supply has excellent electronic characteristics such as high accuracy, precision, and stability, designed with comprehensive over-voltage and over-temperature protection circuits, resulting in higher reliability of the products, and can be used to edit voltage, current and time parameters by the host computer through the panel keyboard or through the communication interface to achieve programmable automatic testing. It is widely used in excitation of inductive loads such as electromagnets and Helmholtz coils.
The dynamic magnetic field shielding effect can reach a higher level (better than 5 nT). By using AC current to generate a magnetic field, it has higher DC and AC magnetic field shielding efficiency, more accurate trajectory tracking function, larger range, and higher response speed. The ability to generate magnetic fields with three components X, Y, and Z within the range of (0-100000 nT) magnetic fields can be precise up to 5 nT, making products and experiments in scientific research, military industry, and medical care extremely meaningful and widely used.
The third-generation smart high precision flux meter is controlled by a microprocessor. It uses electronic integral principle, automatic digital suppression adjustment drift system. Display the measured magnetic flux and magnetic field intensity with a color display.It can measure the total magnetic flux and get the values of magnetic flux density and magnetic field strength. The flux meter is a valuable component in magnetizing machines, manual and automatic magnet detection and classification, and hysteresis loop measurement systems.
The SBV electromagnet is a double-yoke(H-Frame) , variable air gap magnetic field generation equipment with one pole being adjustable. From the excitation of the excitating power source, the field vector forms a closed loop, and a high uniform magnetic field can be generated between two poles, and the field direction is along the axial direction of pole caps. All SBV electromagnets are equipped with a pair of standard replaceable pole caps made of purity iron, which can be replaced to suit to individual experiment requirements. The pure-iron structure is suitable for coils heat dissipation, and the option of cooling water system is also available for extend the operating time.
HEA series power amplifiers are specially designed for the use of exciter, which can provide a stable and adjustable excitation current for the exciter.Under the action of the excitation current, the exciter generates an excitation force on the tested component that corresponds to the excitation current, and the magnitude and phase of this force are only related to the excitation current and the characteristics of the exciter itself, but which is independent of the tested component.<br/> HEA series linear power amplifiers has below advantages: stable performance, strong protection function, easy to operation, no impulse during startup, no pollution to the environment, safe and reliable use. In addition, HEA series linear power amplifiers have good adaptability, which is suitable for the impedance of its basic matching load. It is widely used in excitation of inductive loads such as electromagnets and Helmholtz coils.
The DC power supply is a bipolar constant current power supply with high stability, high accuracy, high linearity and low ripple noise;<br/> Relay-reversal direction controlled by the microprocessor with 5 options to delay time; <br/> Reversal current surge: Less than 1 mA; <br/> Three linear sweep modes including I, I-III, I-III-I quadrants; <br/> Provided with built-in RS-232 or USB port and the relative conversion port;<br/> A set of computer interface command (for RS-232 or USB port);<br/> Timing continuous trigger output during sweeping.
A standard Magnet is a kind of permanent magnet which is specially designed for Hall Element Calibration,capable of generating a stable and uniform magnetic field between two magnetic pole.<br/> The Standard Magnets are manufactured with high-performance rare earth materials to ensure long-term maintenance of its excellent magnetic properties, and which is widely used in a variety of fields requiring accurate magnetic field calibration, such as laboratories, metrology institutes and industrial testing equipment
The field air gap is adjustable in both directions, with a single yoke structure and a horizontal magnetic field direction; Standing upright and having a wide operating space, it is convenient for taking and placing samples and combining with other equipment, making it one of the most common electromagnetic magnets in magnetic research. Used for Hall effect research and magnetoresistance effect research.
The field air gap is adjustable in both directions, with a single yoke structure and a horizontal magnetic field direction; Standing upright and having a wide operating space, it is convenient for taking and placing samples and combining with other equipment, making it one of the most common electromagnetic magnets in magnetic research. Used for Hall effect research and magnetoresistance effect research.
The field air gap is adjustable in both directions, with a single yoke structure and a horizontal magnetic field direction; Standing upright and having a wide operating space, it is convenient for taking and placing samples and combining with other equipment, making it one of the most common electromagnetic magnets in magnetic research. Used for Hall effect research and magnetoresistance effect research.
The field air gap is adjustable in both directions, with a single yoke structure and a horizontal magnetic field direction; Standing upright and having a wide operating space, it is convenient for taking and placing samples and combining with other equipment, making it one of the most common electromagnetic magnets in magnetic research. Used for Hall effect research and magnetoresistance effect research.
The field air gap is adjustable in both directions, with a single yoke structure and a horizontal magnetic field direction; Standing upright and having a wide operating space, it is convenient for taking and placing samples and combining with other equipment, making it one of the most common electromagnetic magnets in magnetic research. Used for Hall effect research and magnetoresistance effect research.
The field air gap is adjustable in both directions, with a single yoke structure and a horizontal magnetic field direction; Standing upright and having a wide operating space, it is convenient for taking and placing samples and combining with other equipment, making it one of the most common electromagnetic magnets in magnetic research. Used for Hall effect research and magnetoresistance effect research.
The field air gap is adjustable in both directions, with a single yoke structure and a horizontal magnetic field direction; Standing upright and having a wide operating space, it is convenient for taking and placing samples and combining with other equipment, making it one of the most common electromagnetic magnets in magnetic research. Used for Hall effect research and magnetoresistance effect research.
The field air gap is adjustable in both directions, with a single yoke structure and a horizontal magnetic field direction; Standing upright and having a wide operating space, it is convenient for taking and placing samples and combining with other equipment, making it one of the most common electromagnetic magnets in magnetic research. Used for Hall effect research and magnetoresistance effect research.
The field air gap is adjustable in both directions, with a single yoke structure and a horizontal magnetic field direction; Standing upright and having a wide operating space, it is convenient for taking and placing samples and combining with other equipment, making it one of the most common electromagnetic magnets in magnetic research. Used for Hall effect research and magnetoresistance effect research.