Search For Your Exact Product Here
Product Description
The WDS electromagnet is a C-Frame, variable air gap magnetic field generation equipment with each pole being adjustable. From the excitation of the excitating power source, the field vector forms a closed loop, and a high uniform magnetic field can be generated between two poles, and the field direction is along the axial direction of pole caps. All WD electromagnets are equipped with a pair of standard replaceable pole caps made of purity iron, which can be replaced to suit to individual experiment requirements. The pure-iron structure is suitable for coils heat dissipation, and the option of cooling water system is also available for extend the operating time.Product Description
The SB electromagnet is a double-yoke(H-Frame) , variable air gap magnetic field generation equipment with each pole being adjustable. From the excitation of the excitating power source, the field vector forms a closed loop, and a high uniform magnetic field can be generated between two poles, and the field direction is along the axial direction of pole caps. All SB electromagnets are equipped with a pair of standard replaceable pole caps made of purity iron, which can be replaced to suit to individual experiment requirements. The pure-iron structure is suitable for coils heat dissipation, and the option of cooling water system is also available for extend the operating time.Product Description
The SBV electromagnet is a double-yoke(H-Frame) , variable air gap magnetic field generation equipment with one pole being adjustable. From the excitation of the excitating power source, the field vector forms a closed loop, and a high uniform magnetic field can be generated between two poles, and the field direction is along the axial direction of pole caps. All SBV electromagnets are equipped with a pair of standard replaceable pole caps made of purity iron, which can be replaced to suit to individual experiment requirements. The pure-iron structure is suitable for coils heat dissipation, and the option of cooling water system is also available for extend the operating time.Product Description
Clamp Electromagnet, of which the shape is like a vice, has two magnetic poles protruding outside the coils. It is usually used to generate an in-plane magnetic field. It is suitable for special operation environments such as microscopy, probe station, the limited space, magneto-optical experiment, and magnetic mineral powder screening. The Clamp Electromagnet is basically custom-made, and can be designed and produced according to user's application conditions and magnetic field requirements.Product Description
Multi-Pole Electromagnet is a kind of closed loop electromagnet composed of multiple caps, which is basically the Four-Pole Electromagnet, and also has the other multi-pole applications such as Five-Pole, Six-Pole, and Eight-Pole. They are mainly applied for Multi-Pole Magnetic Ring Magnetization, Radial-Direction Gradient Magnetic Field, and Rotating Magnetic Field Magnetic Guidance and etc. and they can be designed and produced according to user's individual requirements.Product Description
Single-Pole Electromagnet is an open loop electromagnet consisting of a single pole cap. The main advantages of this electromagnet are open structure and large operating space This electromagnets are equipped with a pair of standard replaceable pole caps made of purity iron, which can be replaced to suit to individual experiment requirements. The pure-iron structure is suitable for coils heat dissipation, and the option of cooling water system is also available for extend the operating time.A standard Magnet is a kind of permanent magnet which is specially designed for Hall Element Calibration,capable of generating a stable and uniform magnetic field between two magnetic pole.<br/> The Standard Magnets are manufactured with high-performance rare earth materials to ensure long-term maintenance of its excellent magnetic properties, and which is widely used in a variety of fields requiring accurate magnetic field calibration, such as laboratories, metrology institutes and industrial testing equipment
The Square Helmholtz coil features a large homogeneity volume and a wide magnetic field working gap. The square coil is generally used for testing the large-sized sample, and the side length of the coil can reach 1 meter or even several meters, and it can be designed as the single-axis, two-axis or three-axis coil. The square coil is applied for Standard Magnetic Field Generation, Offset and Compensation of the Earth's Magnetic Field, Geomagnetic Environment Simulation, Judgment of Magnetic Shielding Effect, Electromagnetic Interference Simulation Experiments, Calibration of Hall Sensors and Magnetometers, Biological Magnetic Field Studies and Material Magnetic Characterization studies. Our Square Helmholtz Coil can be customer-designed and customer-made according to the user’s individual parameter requirements.
The SBV electromagnet is a double-yoke(H-Frame) , variable air gap magnetic field generation equipment with one pole being adjustable. From the excitation of the excitating power source, the field vector forms a closed loop, and a high uniform magnetic field can be generated between two poles, and the field direction is along the axial direction of pole caps. All SBV electromagnets are equipped with a pair of standard replaceable pole caps made of purity iron, which can be replaced to suit to individual experiment requirements. The pure-iron structure is suitable for coils heat dissipation, and the option of cooling water system is also available for extend the operating time.
Halbach permanent magnet is a magnetic ring made from a specially arranged array of permanent magnets, capable of generating a strong one-sided magnetic field inside or outside of the ring, while there's almost no magnetic field on the other side. This design significantly improves magnetic field utilization efficiency and is widely used in high-performance magnetic devices such as particle accelerators, magnetic resonance imaging (MRI), and high-precision magnetic measurement equipment.
The DC power supply is a bipolar constant current power supply with high stability, high accuracy, high linearity and low ripple noise;<br/> Relay-reversal direction controlled by the microprocessor with 5 options to delay time; <br/> Reversal current surge: Less than 1 mA; <br/> Three linear sweep modes including I, I-III, I-III-I quadrants; <br/> Provided with built-in RS-232 or USB port and the relative conversion port;<br/> A set of computer interface command (for RS-232 or USB port);<br/> Timing continuous trigger output during sweeping.
A vibrating sample magnetometer(VSM) is an instrument that is used to measure magnetic properties. It is also called a Foner magnetometer or M-H Curve Hysteresis Graph Test System. <br/> VSM is composed of a master device, an electromagnet, a vibrator, a
HALL EFFECT MEASUREMENT SYSTEM is used to measure the important parameters of Semiconductor Materials such as Carrier Concentration, Mobility, Resistivity, and Hall Coefficient, and so on. These parameters must be grasped and controlled in advance in order to understand the electrical characteristics of semiconductor materials. Therefore, the Hall Effect Measurement System is an indispensable tool for understanding and studying the electrical characteristics of Semiconductor Devices and Semiconductor Materials. The experimental results are automatically calculated by the software, and the Bulk Carrier Concentration, Sheet Carrier Concentration, Mobility, Resistivity, Hall Coefficient, Magneto-Resistance, and other parameters can be obtained at the same time.
One-dimensional High-precision Digital Gauss meters is suitable for most applications that require high testing accuracy and resolution. Measurements range from DC to 100KHZ AC magnetic fields. Automatic zero, automatic range. Hold mode selectable maximum, minimum, peak and valley values. The instrument can simultaneously measure and display 6 parameters. The measurement units can be selected from Gauss, millitesla, A/M, or Oe.
Flux-gate magnetometer is a that accurately measures weak static and low-frequency vector magnetic fields,which has the characteristics of high stability, high linearity, high-precision and full digitization. Compared with magnetic field measurement instruments based on Hall effect principle or magnetoresistance effect principle, it is the best choice for measuring weak magnetic fields. It has digital and analog signal output, and a unique CAN bus network interface suitable for multi array magnetic field testing. It is widely used in scientific research, military industry, aerospace and other departments
The field air gap is adjustable in both directions, with a single yoke structure and a horizontal magnetic field direction; Standing upright and having a wide operating space, it is convenient for taking and placing samples and combining with other equipment, making it one of the most common electromagnetic magnets in magnetic research. Used for Hall effect research and magnetoresistance effect research.
The field air gap is adjustable in both directions, with a single yoke structure and a horizontal magnetic field direction; Standing upright and having a wide operating space, it is convenient for taking and placing samples and combining with other equipment, making it one of the most common electromagnetic magnets in magnetic research. Used for Hall effect research and magnetoresistance effect research.
The field air gap is adjustable in both directions, with a single yoke structure and a horizontal magnetic field direction; Standing upright and having a wide operating space, it is convenient for taking and placing samples and combining with other equipment, making it one of the most common electromagnetic magnets in magnetic research. Used for Hall effect research and magnetoresistance effect research.
The field air gap is adjustable in both directions, with a single yoke structure and a horizontal magnetic field direction; Standing upright and having a wide operating space, it is convenient for taking and placing samples and combining with other equipment, making it one of the most common electromagnetic magnets in magnetic research. Used for Hall effect research and magnetoresistance effect research.
The field air gap is adjustable in both directions, with a single yoke structure and a horizontal magnetic field direction; Standing upright and having a wide operating space, it is convenient for taking and placing samples and combining with other equipment, making it one of the most common electromagnetic magnets in magnetic research. Used for Hall effect research and magnetoresistance effect research.
The field air gap is adjustable in both directions, with a single yoke structure and a horizontal magnetic field direction; Standing upright and having a wide operating space, it is convenient for taking and placing samples and combining with other equipment, making it one of the most common electromagnetic magnets in magnetic research. Used for Hall effect research and magnetoresistance effect research.
The field air gap is adjustable in both directions, with a single yoke structure and a horizontal magnetic field direction; Standing upright and having a wide operating space, it is convenient for taking and placing samples and combining with other equipment, making it one of the most common electromagnetic magnets in magnetic research. Used for Hall effect research and magnetoresistance effect research.
The field air gap is adjustable in both directions, with a single yoke structure and a horizontal magnetic field direction; Standing upright and having a wide operating space, it is convenient for taking and placing samples and combining with other equipment, making it one of the most common electromagnetic magnets in magnetic research. Used for Hall effect research and magnetoresistance effect research.
The field air gap is adjustable in both directions, with a single yoke structure and a horizontal magnetic field direction; Standing upright and having a wide operating space, it is convenient for taking and placing samples and combining with other equipment, making it one of the most common electromagnetic magnets in magnetic research. Used for Hall effect research and magnetoresistance effect research.
We take your privacy very seriously and when you visit our website, please agree to all cookies used.