DC Excitation Power Supply
Search For Your Exact Product Here
Choose The One That Suits Your Needs DC Excitation Power Supply
-
Learn MoreYP Series DC Power Supply
Product Descriptions
The DC power supply is a bipolar constant current power supply with high stability, high accuracy, high linearity and low ripple noise;
Relay-reversal direction controlled by the microprocessor with 5 options to delay time;
Reversal current surge: Less than 1 mA;
Three linear sweep modes including I, I-III, I-III-I quadrants;
Provided with built-in RS-232 or USB port and the relative conversion port;
A set of computer interface command (for RS-232 or USB port);
Timing continuous trigger output during sweeping. -
Learn MoreYPD Series DC Power Supply
Product Descriptions
This power supply is a high stability bipolar constant current power supply (smooth zero crossing commutation without delay). The power supply adopts a linear power supply structure, with high output current stability, low ripple and noise. The output current of the power supply can be continuously changed between positive and negative rated maximum current, and the current is smooth and continuous zero, which can generate a smooth and stable magnetic field in the electromagnet or coil. With our high precision Gauss meter and probe (optional), the power supply can operate in magnetic field mode. The magnetic field value can be directly set in magnetic field mode,The power supply will adjust the output current to make the electromagnet quickly reach the set magnetic field, convenient and fast, and the magnetic field is stable.It can control the field independently or scan the magnetic field continuously. The current mode and magnetic field mode can be switched at any time according to the need, and the operation is flexible. -
Learn MoreHAP Series DC Power Supply
Product Description
Programmable DC power supply is a high-performance DC power supply specially developed for scientific research and industrial applications in power automation control.
This series power supply has excellent electronic characteristics such as high accuracy, precision, and stability, designed with comprehensive over-voltage and over-temperature protection circuits, resulting in higher reliability of the products, and can be used to edit voltage, current and time parameters by the host computer through the panel keyboard or through the communication interface to achieve programmable automatic testing. It is widely used in excitation of inductive loads such as electromagnets and Helmholtz coils. -
Learn MoreHEA Series Power Amplifiers
Product Descriptions
HEA series power amplifiers are specially designed for the use of exciter, which can provide a stable and adjustable excitation current for the exciter.Under the action of the excitation current, the exciter generates an excitation force on the tested component that corresponds to the excitation current, and the magnitude and phase of this force are only related to the excitation current and the characteristics of the exciter itself, but which is independent of the tested component.
HEA series linear power amplifiers has below advantages: stable performance, strong protection function, easy to operation, no impulse during startup, no pollution to the environment, safe and reliable use. In addition, HEA series linear power amplifiers have good adaptability, which is suitable for the impedance of its basic matching load. It is widely used in excitation of inductive loads such as electromagnets and Helmholtz coils.
Learn More About Our Products
-
VSM
A vibrating sample magnetometer(VSM) is an instrument that is used to measure magnetic properties. It is also called a Foner magnetometer or M-H Curve Hysteresis Graph Test System. <br/> VSM is composed of a master device, an electromagnet, a vibrator, a
-
YPD Series DC Power Supply
This power supply is a high stability bipolar constant current power supply (smooth zero crossing commutation without delay). The power supply adopts a linear power supply structure, with high output current stability, low ripple and noise. The output current of the power supply can be continuously changed between positive and negative rated maximum current, and the current is smooth and continuous zero, which can generate a smooth and stable magnetic field in the electromagnet or coil. With our high precision Gauss meter and probe (optional), the power supply can operate in magnetic field mode. The magnetic field value can be directly set in magnetic field mode,The power supply will adjust the output current to make the electromagnet quickly reach the set magnetic field, convenient and fast, and the magnetic field is stable.It can control the field independently or scan the magnetic field continuously. The current mode and magnetic field mode can be switched at any time according to the need, and the operation is flexible.
-
Clamp Type Electromagnet
Clamp Electromagnet, of which the shape is like a vice, has two magnetic poles protruding outside the coils. It is usually used to generate an in-plane magnetic field. It is suitable for special operation environments such as microscopy, probe station, the limited space, magneto-optical experiment, and magnetic mineral powder screening. The Clamp Electromagnet is basically custom-made, and can be designed and produced according to user's application conditions and magnetic field requirements.
-
SB Series Electromagnet
The SB electromagnet is a double-yoke(H-Frame) , variable air gap magnetic field generation equipment with each pole being adjustable. From the excitation of the excitating power source, the field vector forms a closed loop, and a high uniform magnetic field can be generated between two poles, and the field direction is along the axial direction of pole caps. All SB electromagnets are equipped with a pair of standard replaceable pole caps made of purity iron, which can be replaced to suit to individual experiment requirements. The pure-iron structure is suitable for coils heat dissipation, and the option of cooling water system is also available for extend the operating time.
-
Standard Permanent Magnet
A standard Magnet is a kind of permanent magnet which is specially designed for Hall Element Calibration,capable of generating a stable and uniform magnetic field between two magnetic pole.<br/> The Standard Magnets are manufactured with high-performance rare earth materials to ensure long-term maintenance of its excellent magnetic properties, and which is widely used in a variety of fields requiring accurate magnetic field calibration, such as laboratories, metrology institutes and industrial testing equipment
-
WDS Series Electromagnet
The WDS electromagnet is a C-Frame, variable air gap magnetic field generation equipment with each pole being adjustable. From the excitation of the excitating power source, the field vector forms a closed loop, and a high uniform magnetic field can be generated between two poles, and the field direction is along the axial direction of pole caps. All WD electromagnets are equipped with a pair of standard replaceable pole caps made of purity iron, which can be replaced to suit to individual experiment requirements. The pure-iron structure is suitable for coils heat dissipation, and the option of cooling water system is also available for extend the operating time.
-
HALL EFFECT MEASUREMENT SYSTEM
HALL EFFECT MEASUREMENT SYSTEM is used to measure the important parameters of Semiconductor Materials such as Carrier Concentration, Mobility, Resistivity, and Hall Coefficient, and so on. These parameters must be grasped and controlled in advance in order to understand the electrical characteristics of semiconductor materials. Therefore, the Hall Effect Measurement System is an indispensable tool for understanding and studying the electrical characteristics of Semiconductor Devices and Semiconductor Materials. The experimental results are automatically calculated by the software, and the Bulk Carrier Concentration, Sheet Carrier Concentration, Mobility, Resistivity, Hall Coefficient, Magneto-Resistance, and other parameters can be obtained at the same time.
-
Three-Axis Equal-Diameter Coil
The Three-Axis Equal-Diameter Coil, which is a type of three-axis Helmholtz coil exclusively developed by our company, features the nominal diameter coil, the same number of winding turns, and the same specification of wires per axis.<br/> This winding construction allows the Three-Axis Equal-Diameter Coil to have the same resistance, inductance, homogeneity, and B/I coefficient per axis; The coil per axis is fixed to each other in the embedded form, of which this mechanical structure makes the coil to feature a small size and the greater accessibility to the working gap; the whole former is made of non-magnetic PMMA material, which is applied for the study of low and weak magnetic field, and which is very suitable for the shielding room and the magnetic shield. The highest magnetic field of a three-axis equal diameter coil can be designed to be from 0 to 5 Gs.
-
SBV Series Eectromagnet
The SBV electromagnet is a double-yoke(H-Frame) , variable air gap magnetic field generation equipment with one pole being adjustable. From the excitation of the excitating power source, the field vector forms a closed loop, and a high uniform magnetic field can be generated between two poles, and the field direction is along the axial direction of pole caps. All SBV electromagnets are equipped with a pair of standard replaceable pole caps made of purity iron, which can be replaced to suit to individual experiment requirements. The pure-iron structure is suitable for coils heat dissipation, and the option of cooling water system is also available for extend the operating time.
DC Excitation Power Supply Product Accessories
-
Closed Loop Control System
WD type closed-loop control system
-
Power Line
WD type electromagnetic power cord
-
Probe Holder
WD type electromagnetic probe holder
-
Pure Iron Tip
WD type electromagnet pure iron pole head
-
High precision electric control turntable
WD type high-precision electromagnetic control turntable
-
Manual Turntable
WD type manual turntable
The field air gap is adjustable in both directions, with a single yoke structure and a horizontal magnetic field direction; Standing upright and having a wide operating space, it is convenient for taking and placing samples and combining with other equipment, making it one of the most common electromagnetic magnets in magnetic research. Used for Hall effect research and magnetoresistance effect research.
The field air gap is adjustable in both directions, with a single yoke structure and a horizontal magnetic field direction; Standing upright and having a wide operating space, it is convenient for taking and placing samples and combining with other equipment, making it one of the most common electromagnetic magnets in magnetic research. Used for Hall effect research and magnetoresistance effect research.
The field air gap is adjustable in both directions, with a single yoke structure and a horizontal magnetic field direction; Standing upright and having a wide operating space, it is convenient for taking and placing samples and combining with other equipment, making it one of the most common electromagnetic magnets in magnetic research. Used for Hall effect research and magnetoresistance effect research.
The field air gap is adjustable in both directions, with a single yoke structure and a horizontal magnetic field direction; Standing upright and having a wide operating space, it is convenient for taking and placing samples and combining with other equipment, making it one of the most common electromagnetic magnets in magnetic research. Used for Hall effect research and magnetoresistance effect research.
The field air gap is adjustable in both directions, with a single yoke structure and a horizontal magnetic field direction; Standing upright and having a wide operating space, it is convenient for taking and placing samples and combining with other equipment, making it one of the most common electromagnetic magnets in magnetic research. Used for Hall effect research and magnetoresistance effect research.
The field air gap is adjustable in both directions, with a single yoke structure and a horizontal magnetic field direction; Standing upright and having a wide operating space, it is convenient for taking and placing samples and combining with other equipment, making it one of the most common electromagnetic magnets in magnetic research. Used for Hall effect research and magnetoresistance effect research.
The field air gap is adjustable in both directions, with a single yoke structure and a horizontal magnetic field direction; Standing upright and having a wide operating space, it is convenient for taking and placing samples and combining with other equipment, making it one of the most common electromagnetic magnets in magnetic research. Used for Hall effect research and magnetoresistance effect research.
The field air gap is adjustable in both directions, with a single yoke structure and a horizontal magnetic field direction; Standing upright and having a wide operating space, it is convenient for taking and placing samples and combining with other equipment, making it one of the most common electromagnetic magnets in magnetic research. Used for Hall effect research and magnetoresistance effect research.
The field air gap is adjustable in both directions, with a single yoke structure and a horizontal magnetic field direction; Standing upright and having a wide operating space, it is convenient for taking and placing samples and combining with other equipment, making it one of the most common electromagnetic magnets in magnetic research. Used for Hall effect research and magnetoresistance effect research.
